A chipper crafted backrest adds a aligned of consolation to any Harley Davidson motorcycle without compromising on style.5. Build the anchor. Create an anchor from two pieces of steel that will connect the backrest's center plate to the Harley. While it depends on the Harley model, the anchor will likely take an L-shape so that it can be screwed to the bottom of the seat.
Part measurements. You desideratum To gauge the diameter of your seat and estimate the heighth for the backrest. Again, obtain comment of any metal straps underneath the seat that can be used to anchor the backrest's stays.
2. Construct the frame. On the argument of your measurements, make an upside-down U-shape of steel tubing to serve as the frame of the backrest. Drill two holes into Everyone side of the U-frame.
3. Add a plate to cede the backrest power and a assign to anchor it to the Harley. It should be approximately six inches tall across the U-frame. Screw and then weld the plate onto the arms of the U-frame. Also, be sure to drill holes into the plate so you can connect it to the bike.
4. Create the cushion around the frame. This is probably best done by a professional upholsterer, but if you have experience with upholstery you can give it a try. Leather is the preferred material for its style and physical properties. Fill out the leather with dense foam and consider stitching a zipper into the cushion so you can access parts inside.
While you can certainly good buy a figure of backrests on the retail marketplace, building your own backrest Testament allow you a connexion to your bike and your consolation that you wouldn't otherwise arouse. Go next these steps To erect your own Harley backrest.
