Using a trolling motor on your miniature boat can highly breakthrough your Pleasure on a fishing Journey and grip you fishing longer. Transom mount trolling motors generally are equipped with battery clamps, nevertheless extending the wires To admit remote placement of the battery and a trail breaker is a larger approximation.
Instructions
1.3. Divide a 6-inch collection of blood 10 gauge wire. Crimp solderless ring connectors to both ends.
Chop a plenty of claret 10 gauge wire expanded Sufficiently to arrive from the battery to the trolling Engine.2. Crimp a solderless ring connector to one neb of this wire. Catch a connector that Testament fit over the studs of the line breaker. One end should fit over the circuit breaker stud; the other ring will need to be large enough to fit over the positive stud on the deep cycle battery.
4. Connect the red wires to the circuit breaker and the positive terminal of the battery
5. Splice this long red wire to the red wire of the trolling motor with a solderless butt connector, or use a trolling motor plug and receptacle. Tape this connection securely, or use heat shrink tubing to protect it.
6. Splice the black 10 gauge wire to the black wire of the trolling motor with a solderless butt connector. Tape this connection securely, or use heat shrink tubing to protect it.
7. Crimp a large solderless ring connector on the other end of the black 10 gauge wire. Connect it to the negative terminal of the deep cycle battery.
