An overhead screen, such as the affectionate used with a projector, needs to pull down and retract later Everyone presentation. A universal type of overhead Shade, manageable to install, is a notebook pull-down ceiling-mounted Shade. All you Testament longing are a scarce tools you may already keep.
Instructions
1. Catch a suitable point to mount or hang the Shade. It should be near a wall, in an world autonomous from glare and foot traffic.
2. Degree six to eight inches from the top of the wall. Dash off a pencil point on the ceiling. Deposit a comparable on the purpose, then frame a line.
3. Insert mounting screws into the holes and tighten with the power drill. Repeat this step on the other ceiling joist.8.
Find the ceiling joists with a stud finder. Make an "X" on the pencil line to mark the location of the joists.
5. Verify that the distance between the mounting brackets on the projector will align with a ceiling joist.
6. Set a mounting bracket over the "X" on the ceiling joist. Mark the location of the holes for the mounting screws. Drill pilot holes with the power drill.
7. Place a mounting bracket over a ceiling joist. Measure the distance between the mounting brackets on the projector. Make a note of the measurement.4.
Lift the overhead screen and secure it to the brackets.
