Repair Lingering Rust on an Automotive Chassis
Depress the Engine switch and carefully utilize the sanding revolve to the rusted existence. Sand out the dye and rust until you are seeing naked metal.2.
Instructions
1. Attach the sanding rotate to the drill Engine.Rust on your van's chassis, unless attended to, can cusp up spreading over the solid chassis. Rust is able to addition a foothold in your vehivle's chassis when a scratch or dent occurs and air and flood are allowed to contact the naked metal. Naked metal oxidizes, forming rust when not properly protected. Usually, the undercoating on your motorcar's chassis protects the metal from oxidizing. Provided left alone continued Sufficiently, rust on the chassis can confine up weakening the chassis, which can be malicious.
Attach the wire wheel to the drill motor and depress the switch to begin the motor. Carefully apply the spinning wire wheel to the rusted area and remove as much rust as possible.
3. Apply the sandpaper to the rusted area by hand, rubbing firmly back and forth to remove the remnants of the rust.
4. Pour a small amount of the rust converter over the rusted area and spread it around and beyond the rusted area with the paint brush. Allow rust converter to dry and apply another coat.
5. Coat the area with primer paint, keeping the paint nozzle between six and ten inches away from the bare metal and keep it moving. Allow this coat to dry and apply another coat.
