Copper a Starter on a 1996 Camry
When contemplating the changing of the starter on a 1996 Camry, it is advisable to research the fuse, relay, ignition switch and wiring head. All the items listed could engender the starter to fail to function. Everyday symptoms of a wick starter are a deafening clicking boisterousness with no also operation, a slow turning engine, a deafening grinding blast when the starter is busy or no response at all.
Instructions
1. Remove the cocksure and con terminals on the battery. Remove the battery hold-down bracket by removing the two nuts on the vertical rods using a wrench.4. Remove the large nut securing the main power wire to the back of the solenoid using a wrench. Remove the wire. Remove the two bolts securing the starter to the bellhousing using the appropriate socket.
Remove the cruise control incorporate using the due socket to remove the bolts. Remove the three bolts securing the cruise governance to its frame-mounted bracket using a socket. Lift the cruise control up, and remove the electrical plug from the cruise domination. Place the unit to the side elsewhere of the form.
3. Remove the cruise determination bracket using a socket. Lift the bracket out of the way. Pull the small actuator wire off the S terminal on the starter solenoid.
Lift the battery absent of the vehicle. Remove the battery tray using a socket to remove the bolts.2. Remove the starter from the car.
5. Install the new starter in reverse order of removal.
