Installing a fuel filter to your generator Testament cultivate performance and lift accumulate your generator for free of debris.
Instructions
1. Remove the fuel line from the fuel receptacle to the injectors. This limit needs to be taken to the Car parts store to match up the correct-size fuel filter.
The filter is crowing positioned between the fuel pump and the injectors. Provided the fuel pump is in the receptacle, you can put it on the fuel border between the receptacle and the injectors. Make certain you exchange away the filter when it starts looking begrime and your generator performance starts decreasing. Be certain to proclaim the parts store what amicable of generator you're running a filter on to ice they sell you a filter that's convertible to the ratio of fuel flow.
Purchase two hose clamps with the filter.
2. Attach the fuel line back to the generator. Cut the fuel line in a spot where the line is not close to anything that will get hot when the motor is running.
3. Attach the line coming from the fuel injector to the side where the arrow is pointing toward. Ensure you have one of the hose clamps on the line. Tighten the hose clamp to secure the fuel line to the filter.
4. Connect the end of the line running out of the fuel tank to the other end of the fuel filter. Ensure the hose clamp is on the fuel line so you can tighten it with the flathead screwdriver. Ensure the fuel line is snug on the filter.
5. Start the generator to check for leaks. You'll want to listen for any hesitation or stalling while it's running: Stalling will mean the fuel line is crimped somewhere.
