Racing cars is witty, and can equip a skilled Issue when done in a sheltered earth. On the other hand before you purpose off to the track to tear it up, you compulsion to adjust your machine guarded. One safety fact available to contest cars--as hardy as accustomed vehicles--is a battery disconnect switch. With one of these switches you can nowadays abbreviate competency to the vehicle in occasion of a rollover or other accident. Run it through the areas you'll be running it for the final installation.6. Remove the cable and strip the ends.
2. Treasure a suitable direction for the battery disconnect switch. This can be genuine up front on the bumper, or all the plan in the back in the Timber. It depends on personal preference, or provided you're racing the motorcar, the rules of the specific forming you're racing with. Arrange positive you compass Sufficiently space extreme the panel to mount the switch and manoeuvre the terminals in assign.
3. Drill a gap in the stage metal using the drill and drill bits for the switch. Start with a smaller drill bit and progressively work your way up, which will help keep the panel in shape.
4. Mount the disconnect switch. Put it through the sheet metal so the switch is outside of the body and use the supplied mounting nut.
5. Do a test run of the battery cable so you can figure out what length you need. They're not demanding to install--it decent takes a dwarf bit of lifetime and preparation.
Instructions
1. Disconnect the contrary terminal of the battery with the 3/8-inch ratchet.Then crimp on the terminal end to both sides of the cable.
7. Bolt one end of the battery cable to the switch. Don't worry about which terminal it's installed on; it should work on both sides as it's just an on-off switch.
8. Run another length of battery cable from the switch to the accessories you need for the vehicle. This can be multiple lengths depending on your usage, and can go to the stereo, fuse power, starter and alternator, For instance.
9. Run the cable for the final time and secure it to the vehicle with zip ties. The easiest way to do this is through the vehicle's interior, using a rubber grommet on the firewall and hiding the cable under the carpet. Sure if you don't have carpet, secure it where you can.
10. Bolt the marine-style battery terminal onto the battery post using the 3/8-inch ratchet and socket set.
11. Bolt the battery cable to the new terminal and reinstall the negative terminal. Now the switch is complete and should be operating correctly. Turn the switch to "on" and make sure the vehicle runs correctly.
