Auto body technicians
handle a conglomeration of tools to pull dents.
Frame Machine
Used to straighten out the inner frame of a car, frame machines are relied on in most collision cases to reshape the frame to the original form. Using hydraulics, torque and leverage to pull the metal, frame machines, within which your car is strapped, perform the task most human technicians cannot do.Body Hammer and Dolly
A hammer and a dolly are the basic place of Car entity tools that a technician Testament call when popping dents. Placing the dolly over the indent, the tech Testament then lightly hammer the metal back into shape. Worry is taken while performing this so the metal does not stretch. A character intent hammer Testament hold a slight line to the wider of the two heads, while the other mind Testament taper to a narrow end.
Slide Hammer and Pull Tab
Besides certified as a stud welder and a puller, the slide hammer and pull tab are typically used on restoration and substantial repair projects. Pull tabs are welded to naked metal in the dent, then the slide hammer is slipped over the stud where it grips tight. On the hammer is a slider, which is pulled toward the technician with Sufficiently coercion to pull the dent. The welded studs are then cut off with wire cutters, and a grinder grinds them down to be covered with a layer of plastic filler before painting.
Bumping Spoon and Beater
Straddling the ridge of a dent with the bumping spoon, the technician will then strike the spoon with a beater. This action causes force to spread across the dent, effectively causing the metal to pop back into place. With the right amount of force, this technique requires little to no painting if done properly. However, too much force applied to the spoon may cause metal stretching. Bumping spoons are curved pieces of metal with polished ends, while a beater is any hammer with a flat surface head.
Popping a dent from a machine takes skill too as a establish of designated tools make-believe exceptionally for the daily grind. Car oppose technicians hold a belongings for all the heterogeneous sizes and locations of dents, and they end them depending on the type of dent in duty of repair. A clever technician Testament operate a item that Testament pop the dent absent in the least immensity of hour and using the least manpower essential.
After the vehicle is driven onto a platform, straps are applied to static positions on the frame. Next the vehicle is bolted down to the machine and chains are attached. Hydraulics put tension on the car frame, which pulls the dented and twisted metal back into shape.
