FIxing a abyssal chip in machine emulsion is a engagement that requires fair-minded a infrequent hours of your clock. If you need to, apply another coat right over the first one.
Analyze the chip to see how deep it is and if it goes all the way down to the metal. Get a good idea of what you are dealing with to decide if you need to fill the chip with bondo or simply repaint the area.
2. Scuff the bare metal area (if any, with sand paper or an emory board to receive a good foundation for the paint).
3. Clean out all debris, dirt and dust with alcohol or a mild soapy solution.
4. Mask off the area around the chip using masking tape and paper.
5. Apply paint to the chip with your applicator, or a brush at the right temperature.
6. Let dry. Then assess your work. It helps restore the attraction of your automobile, and Testament prevent added deadpan problems approximating rust and corrosion. The best kind idea to start is to seal the chip entirely, then sand and repaint the damaged area with a matching coat of whitewash.
