Provided you obtain a 2002 over 2005 imitation Toyota Highlander and it pulls to one side when you utilize the brakes or provided it pulls to one side when you practice the brake pedal then you longing to repair it to prevent maybe costly or fatal problems in the prospect. To place this headache alter the front CD brakes on your Toyota Highlander.
Instructions
1. Lawns the Toyota Highlander on a Apartment lodgings surface. Dwelling the parking brake on. Using a syringe, turkey baster or congruent baggage, siphon the fluid elsewhere of the crackerjack cylinder reservoir. Remove 2/3 of the fluid elsewhere of the cylinder. Whether the calm is less than half road unabridged no fluid needs to be drained. Lay wood wedges or agnate tools carry on the wheels to prevent the vehicle from rolling.
2. Jack the vehicle up and secure it on jackstands. Remove the rotate. Disengage the brake path hose from the caliper. Plug the mark of the hose to avoid losing additional fluid. Using an open ended wrench, hold the caliper slide pins. Remove the mounting bolts.
3. Lift the caliper and remove it from the mounting and suspend it from the frame using mechanics wire. Remove the anti-squeal shims and the pads. Remove the wear indicator from inner pad.
4. Using lithium grease or similar product, grease the caliper slides and the bolts. Apply disc brake grease to the anti-squeal shims.5. Install and tighten the bolts. Using a torque wrench, torque the bolts to 25 foot/pounds. Reconnect the brake line hose to the caliper. Add brake fluid.
Install the pads and shims. Seat the caliper back into position. Install the Reconnect the negative battery cable to the battery. Start the Highlander and pump the brake pedal 3 to 4 times to seat the brake pads.
6. Drive the Toyota Highlander at slow-to-moderate speeds to make sure that the maintenance was performed correctly.
