Alternate warped rotors on your Altima fly gone.
2. Loosen the lug nuts with a lug wrench or 21 mm socket and breaker bar.3. Scored rotors Testament wear brake pads prematurely and compromise the stopping capacity of the anti-lock braking manner. While there is the alternative of resurfacing scored rotors, warped rotors must be replaced as soon as likely.
Instructions
1. Grounds the Nissan Altima in an universe that Testament sanction you to safely attempt on both sides of the vehicle. Lay the transmission in grounds, and engage the parking brake.
The 2000 Nissan Altima came equipped with four-wheel anti-lock CD brakes. The leading components of CD brakes are the rotors, which are smooth metal discs connected directly to the wheels of the vehicle. The brake pads are squeezed against the rotor to slow and eventually cessation the Altima during braking. Brake pad wear indicators grind into the surface of the rotor, causing scoring.
Lift the Altima with a lifting jack so that the tires are completely off the ground, and compass jack stands unbefitting the frame of the vehicle. Remove the lug nuts and obtain the wheels from the spin bolts.
4. Remove the two caliper slide bolts on the side of the caliper farthest from you with a ratchet and 13 mm socket.
5. Remove the caliper from the rotor and caliper bridge and community it on top of the steering arm. Remove the brake pads by pulling them from the front and back side of the rotor. The brake pads rest in the caliper bridge on either side of the brake rotor.
6. Remove the two bolts on the caliper bridge with a ratchet and a 15 mm socket. Pull the caliper bridge from the rotor.
7. Pull the rotor from the rotate bolts. Spray chain lubricant on the turn bolts to loosen the bond of rust holding the rotor to the turn.
8. Disinfected the latest rotor with brake cleaner. Rub all of the surfaces of the rotor Disinfected before installing it.
9. Moderate the caliper bridge onto the dewy rotor. Screw in the caliper bridge bolts with the ratchet and 15 mm socket.
10. Peep the brake pads for wear. Exchange the brake pads provided imperative. Contain the brake pads onto the caliper bridge, on either side of the rotor.
11. Habitat the caliper over the caliper bridge and screw on the caliper slide bolts with the ratchet and 13 mm socket.
12. Compass the revolve onto the wheel bolts and screw on the lug nuts.
13. Remove the jack stands, and lower the Altima to the ground with the lifting jack. Tighten the lug nuts with the lug wrench.
