Moderate 99 Passat Rear Brakes
The 1999 VW Passat is apportionment of the B5 hour of Passats and shares its chassis with the equally common Audi A4. While impressively engineered, the Passat, coextensive most German and European cars, is again not the cheapest machine to preserve. Owners who are keen to dive in and perform some of their own routine perpetuation can save a appreciable size of way. This includes jobs love replacing the rear brake pads, which is straightforward with the true tools and Accoutrement.
Instructions
1. Effect that the machine is placed on a Apartment lodgings, flush surface. Loosen the Passat’s rear turn lug bolts with a tire iron. These are located on the top and backside of the caliper. Utilize an open-ended wrench to dominion the inboard side of the bolt yet while you loosen it.3.
Lift the rear with a sturdy floor jack and lower the machine onto jack stands placed under both sides of the vehivle.2. Pull the caliper spring clips off with a couple of pliers. Remove the caliper bolts with a socket and a ratchet.
Slide the caliper off of the rotor. Disconnect the brake wear sensor limit. Agency the caliper while you donkeywork with a wire tied to a nearby suspension object, so the weight of it does not pull on the brake wrinkle. Remove the experienced brake pads with your hands.
4. Expansive the skilled cylinder brake reservoir and remove a small amount (about ½-inch) of brake fluid. Place the special Audi caliper tool on the caliper piston and compress and turn the piston into the caliper to make room for the new, thicker brake pads.
5. Spray the brake components with brake cleaner and wipe them down. Install the new brake pads in the reverse manner that they were removed. Slide the brake caliper over the rotor and install and tighten the brake caliper bolts. Reinstall the caliper spring clips.
6. Repeat the above steps for the other side of the car. Reinstall the wheels and lower the Passat off of the jack stands. Fill the brake reservoir with fresh brake fluid and then pump the brake pedal until it feels firm.
