Rock or stone chips are the most casual causes of damage to a windscreen. The Ford Taurus can be prone to this type of damage due to its manage heighth. This is chiefly exactly of older models of the Taurus, which were smaller than the ongoing depiction and sat lower to the ground. Although replacing the windscreen is a conglomerate ball-breaker, the plot of the Taurus's front windscreen makes it a attractive straightforward deadweight.
Instructions
1. Pry up on the the plastic trim moulding with a windscreen trim Emigration part. Wedge the teeth of the part under the trim and pry up on it.
7. Apply a bead of urethane to the recess on the frame where the windshield will be mounted.8.
Pull the windscreen off.
4. Clean the Taurus frame where the new windshield will go. Make sure to remove the old urethane residue and trim the molding back to 3mm with a razor.
5. Slide the new rubber molding around the outer edge of the glass on the new windshield and fit the outer trim into the grooves on the rubber trim.
6. Apply a liberal amount of urethane primer to the frit band on the windshield. The frit band is the black strip running around the outside of the glass on the windshield.
2. Reduce the urethane moulding approximately the out of the glass with an automotive cutting cutting edge.3.
Align the windshield on the frame and press the windshield into place. Allow the urethane to cure for 12 hours.
