Campbell Hausfeld offers three 115-volt flux core welders.
Campbell Hausfeld offers three flux-core welders. The valuable aid of flux-core wire welding is that no Gauze is needful. The shielding information used by the welder is in solid conformation in the core of the welding wire, which, when exposed to the heat of welding, Testament turn to a gaseous society to shield the weld. Though they are intended to further flux-core wire, all three Campbell Hausfeld welders can further call shielding Gauze when an add-on Gauze nozzle is installed, or when the included polarity switch is tripped, depending on the mannequin.
WF215001AV
The 115V WF215001AV wire refreshment welder is Campbell Hausefeld's entry exact flux-core welder. It is establish up to be an easy-to-operate at ease welder that is skilled for welding a divergency of metal thicknesses up to 3/16 inch thick. It features four heat settings for advice of exercise and runs on morals 115-volt household contemporary. Weighing 43 pounds, the WF215001AV is blaze and portable, capable of growth brought to the residence of whatever needs to be welded within the spread of an margin cord. The welder can be fitted to drudge with Gauze welding by purchasing a seperate Gauze nozzle. Campbell Hausefeld's MSRP for the WF215001AV is $219.00 as of Stride 2011.
WG206000AV
The Campbell Hausfeld WG206000AV MIG/flux-core wire aliment welder is primarily designed to handle flux-core wire, on the contrary can be switched to MIG Gauze welding. It features thermal overload protection to prevent the unit from overheating during use. The WG216001AV is priced at an MSRP of $269.00 as of March 2011, and includes a starter spool of flux-core wire further as two extra welding tips.
Warranty Information
All three Campbell Hausfeld flux-core welders are covered by a limited five year warranty against manufacturer's defects in materials or workmanship. An external polarity control switch allows you to change from MIG to flux-core welding without having to purchase additional parts and supplies.WG216001AV
The Campbell Hausfeld WG216001AV is a step-up product from their basic flux-core welder design, featuring the necessary components included with the purchase of the welder to quickly adjust from flux-core welding to MIG welding without having to purchase additional components. The 70-amp, 115-volt welder works with household electrical current, and has four heat settings To admit you to quickly fine tune the welder to suit a variety of metal thicknesses up to 3/16 inch. It features a rotary dial with four settings To admit you to quickly tune the output of the welder for a conglomeration of metal thicknesses up to 3/16 inch thick. The welder features 115-volt household ongoing compatibility, and again features thermal overload Safeguard to prevent damage to the unit in the circumstance of problems with the welding surface. The MSRP of the WG206000AV is $225.00 as of Footslog 2011, and includes everything you want to receive started, including the wire feed pistol grip and power cord, wire brush, welding shield, and starter roll of flux-core wire.
Limitations of the warranty include abuse of the unit and damages due to improper use of the welder.
