This congenial of Rugged usage hastens the obligation for clutch replacement.
The clutch in an ATV is normally trouble-free and gives enduring avail with minimal or no maintainance. It is a stressful effects, on the other hand, and you Testament eventually require to transform it. And you Testament committal to conclude that sooner rather than consequent provided you create a abundance of mudding or towing with your ATV. Happily, clutch kits are available for all typical ATVs. With a clutch utensils, basic tools and a minimum of mechanical endowment, you can restore your clutch so that it's love original.
Instructions
1. Soak the fresh clutches from the tools in Engine oil overnight.
2. Position the extract pan under the engine and remove the extract plug. Spare all the oil to bleed.
8. Replace the clutch cover and reattach the screws that hold it in place. Replace the oil drain plug and refill the engine with fresh oil.
Loosen the bolts that hold the pressure plate in place. Use a cross-pattern to loosen incrementally until all bolts are out. Remove the pressure plate carefully, and catch the clutch actuator that is in the center of the pressure plate. Set the pressure plate and actuator aside. If there is a ball bearing under the actuator, be sure to catch it as well.
5. Remove all the old friction plates and metal plates. Check the hub and housing for wear, and clean out any particles with a shop rag.
6. Install the new plates, beginning with a friction plate and then a metal plate, alternating until you get all the new plates in. Refer to the instructions that come with the kit.
7. Replace the clutch actuator, the ball bearing (if any), and the pressure plate. Reattach the bolts in a cross-pattern and torque to the value specified in the service manual.
3. Remove the screws holding the clutch contain in place, and remove the cover. If necessary, use a screwdriver to prop the foot brake out of the way.4.
