The 1993 Plymouth Duster has a serpentine operate sash. This funds one cummerbund powers all of the accessories on the engine. When the cestuses stretches as well far or breaks, all of the engine accessories, adore the faculty steering pump, alternator and saturate pump, break off working. Provided this happens, you could damage your engine. Replacement of the serpentine sash can metamorphose tricky provided you cause not hold a captain for routing the replacement girdle. Before starting, haul a diagram of Everyone pulley and how the band routes approximately it. This will help you during the installation process.
Instructions
1. Locate the tensioner pulley to the left of the large crankshaft pulley located in the center of the engine. The tensioner pulley is below the alternator pulley.
Lower the pulley, and remove the ratchet driver.
Do not place the belt on the tensioner pulley at this time.
4. Rotate the tensioner pulley upward, and place the serpentine onto the pulley.2. Place a three-eighths-inch ratchet driver into the square hole on the tensioner arm, and rotate the tensioner pulley upwards to release pressure on the Duster's belt.3. Pull the serpentine belt off all of the pulleys, and then route the new belt onto the pulleys using the guide you drew.
