The alarm that Toyota fabricated available for its 2001 vehicles was the VIP RS3000, which was available as an optional point on all Tundra pickup trucks.1. Area the gloss in the ignition switch and turn the switch to the "ON" position.2. Press and dominance both buttons on the remote at the duplicate age for at least two seconds.
Arming and disarming a Tundra's anti-theft alarm action requires a unmarried press of a Press-stud on the remote transmitter. Disabling the alarm system---placing the process in "valet process," in which all security functions are turned off---requires that you proceed from a exact short sequence of steps from inside the cabin of the Motor lorry. The extreme two steps must be executed in 30 seconds.
Instructions
Chronometer for the status observer's LED to turn on.
3. Hire "VALET Money ON," the resources in which all security functions are disabled.
4. Replete the following steps in 30 seconds from start to finish to prevent the alarm from reverting back to its previous settings.
5. Press the top button on the remote control three times. The "chirper" will chirp one time and the exterior lights will flash once.
6. Turn the ignition switch to the "lock" position. The chirper will chirp three times and the exterior lights will flash three times.
