Wheels are imaginary of metal, and can in consequence convert dented by continuance driven extremely brisk to curbs, running over substantial article, colliding with another vehicle, or from career damaged during a tire pin money or while a tire is duration mounted to the trundle.3. Sand the filler with 220 grit sandpaper to smooth is flush with the surface of the wheel, then go over the wheel with 400, 800 and then 1200 grit sandpaper. Keep the sandpaper wet while sanding by holding a running water hose over it or dipping the paper into a bucket of water.
1. Sand inside and up to two inches enclosing the dent with 220 grit sandpaper. This won't settle buried scratches on the surface of the rotate, but it will prepare the surface of the dent for the filler.
2. Apply a small amount of filler to the dent so that it is completely filled in. Use the squeegee to apply it and smooth it out. Let the filler dry for thirty minutes.
Thanks to spin dents can't be repaired in the corresponding course as chapter metal dents, other steps are available to practise them glance choice again. Most persons can locate a dent in a turn in aloof a infrequent hours, depending on the exact type of Stop deposit on the wheels.
Instructions
Rinse the wheel and allow it to dry completely.4. Spray the wheel with paint that matches its finish. Most automotive stores carry spray paint made for each type of wheel finish, so it's easy to find a match. Hold the can 6 to 8 inches from the surface and spray three to five thin coats on the surface.
5. Go over the wheels again with clear coat spray paint. Use three thin coats and allow the wheels to dry for three hours before handling them.
