Tuesday, 21 October 2014

Alter The Oil Inside A Ford Explorer

The Ford Explorer has a scarce onliest characteristics that beget an oil chicken feed on the Explorer at odds from other Ford models. Whether your Ford Explorer has a 5.0 engine, then the engine block Testament admit two oil extract plugs. A 4.0 litre engine has the oil filter on the backside of the passenger side, while all other engines bear it on the Chauffeur side.


Instructions


Prepare Your Explorer for an Oil Change


1. Lift the Ford Explorer using a motorcar jack. Locate jack stands underneath it. Provided you don't own jack stands, impel the vehivle up onto rotate ramps.


Close with an oil drip pan, cleaning cloths, virgin oil filter, socket wrench and strap-type oil filter wrench. Direct to your owner's publication for the prerrogative socket wrench bigness. Slide under your Ford Explorer. The dipstick has a gutless handgrip. Remove these components and establish aside.


3.2. Pop the hood and place the oil filler and dipstick. The oil filler is a round switch with a picture of an oil can.


Change the Oil


4. Set the oil void plug or plugs on the backside of the engine block. Remove the plug using a wrench and pull it out quickly. Let the oil drain into a drip pan for 10 to 15 minutes.


5. Take off the oil filter using a strap-type oil filter wrench. Check the gasket and threads for damage. Dump the old oil into the oil drip pan.


6. Screw the new oil filter on by hand. Tighten the filter as much as possible using your hand. Replace the oil drain plug using a wrench, so that it's snug against the engine block.


7. Slide out from under your Explorer and add oil to the oil fill. Refer to your owner's manual for the correct amount of oil for your Ford. Turn on the engine and watch the oil pressure gauge, located on the dashboard, to make sure it rises.


8. Lower the Explorer and turn off the engine. Take an oil reading on the dipstick. If the oil level isn't at full, add a bit more oil.


9. Make sure you properly dispose of used oil. Fill plastic containers with the old oil and drop it off at an auto parts store with an oil disposal. If you're not close to an auto parts store, call your local trash company for information about oil disposal.