Dents can be an eyesore yet on a contemporary van, on the contrary having them repaired at a reason shop can be expensive. There are many ways you can repair dents yourself using a meagre tools construct encompassing your territory or in a native Car avail store. Repair your machine's dents and acquire it looking allied latest without spending a group of method in the action.
Small Dents
Some dents can be repaired using a lucid household plunger, soak and dish cleaner. This is the simplest hang-up to remove a dent on account of no depiciton is involved. Wet the dent using a dwarf proportions of dish liquid and some irrigate. Hold the sprayer eight to 12 inches from the surface of the paint and move it horizontally. Overlap each stroke slightly for the best coverage. Let the car dry for Day and night before touching or driving it. Whether the dent pops absent completely and there are no chips or cracks in the whitewash, the profession is all. Provided there are small chips or scratches in the paint, use a small amount of touch-up paint to cover them.
Large Dents
Large dents want more work and several more tools. You can use a plunger to remove the dents, but it may not work well. Instead, use a drill and dent puller to repair the dent. These tools can be found at any auto parts store. Drill several holes in various places in the dent. Place the tip of the dent puller in one hole at a time, screwing the dent puller into the hole. Pull the weighted handle back towards your body to pull the dent out. Use the dent puller in several holes so the metal is pulled out as smoothly as possible.
Once the metal is as flat as you can get it, use a grinder and 80-grit sandpaper to grind away all of the old paint and primer. Grind the dent and surrounding area down so that only bare metal is showing. Apply a thick layer of body filler over the repaired dent and allow it to dry. Use a dual-action sander and 120-grit sandpaper to smooth the dried body filler so that it is even with the surface of the car. Sand the area again using 300-grit sandpaper so that the deep scratches from the 120-grit paper area removed.
Refinishing Dent Repairs
Once the dent has been repaired with filler and has been sanded smooth, spray two coats of primer over the entire area that has bare metal showing. Wait 30 minutes for the primer to dry. Spray four to six coats of paint, allowing 30 minutes for each coat to dry before applying the next coat. Once the paint has dried, spray three to five thin coats of clear coat paint on the car. City the plunger in the centre of the dent and exercise energy until the plunger is suctioned against the van's surface. Pull the plunger back to pop the dent outside. It may takings assorted attempts before the dent pops outside completely. You can very slide the plunger in the soak to action it environing to changed areas of the dent.
