Whether you require or yen to modify the door panels on your Ford Expedition vehicle, removing the elderly panels is the fundamental development. Removing a panel is besides needed whether you longing to examine or repair anything stored within the door, analogous the windows and their regulators. You longing to remove all devices connected to the Expedition's door, including the window controls and the door grip, before you can remove the panel itself.
Instructions
1. Include a hooked thing carry on the panel to arrive and remove the retainer clip, then pull the handle off. An auto parts store can sell a tool specifically for this.3.
Unplug the cable from the Expedition battery's bad terminal. This is principally chief provided the vehicle has bent windows.2. Detach and remove the window Eccentric person (share curler) provided the Expedition has guidebook windows.
Remove the control panel on the armrest if the vehicle has power windows. Use a small flathead screwdriver to pry the panel plate off and disconnect the electrical connectors.
4. Unscrew the retaining screws that are behind the control plate and the courtesy lamp housing. Pull off the triangular trim cover near the side mirror and detach the retaining clip behind it with a small Phillips screwdriver.
5. Pry off the small circular trim cover near the door handle, remove the screw behind it and remove the handle. Pry out the plastic retaining clip securing the main trim panel at the font edge.
6. Lift the pan up and away from the door and disconnect all its electrical connectors to remove it. If you need to access the inner door, carefully peel back the watershield. This shield must be pressed back into place before re-installing the door panel.
