Replacement bolts are inexpensive and light to jewel.
On a side assign or top display battery, the cable itself is held onto the battery with an 8 mm bolt. In many cases, the metal on the bolt can be eaten elsewhere by caducity of acid accumulation, eventually rendering it ineffective in holding the cable in assign. In other cases, the bolt can be at sea during the development of removing and replacing the battery. Replacements for these bolts are indubitable elementary to gem and still easier to install.
Instructions
Instructions for Top Post Battery
1.6. Position the terminal over the battery contact and insert the new bolt through the terminal and the recessed thread. Tighten the bolt for a secure fit.
3. Thread the fresh 8 mm bolt into the clamp bound of the top advertise terminal. Attach the retaining fan onto the other cusp of the bolt and dwelling the terminal over the battery advise. Tighten the nut for a secure fit.
Instructions for Side Post Battery
4. Disconnect the cable from the battery. Use the ratchet and socket to unscrew the bolt from the battery and pull both the terminal and bolt from the battery.
5. Pull the bolt out the terminal. Set the terminal aside and discard the old bolt.
Disconnect the cable from the battery. Bag a ratchet and socket to loosen the bolt on the terminal clamp.2. Grip the kernel on the clamp bound of the top publish terminal with a box-end wrench while removing the retaining follower from the bolt. Pull the bolt elsewhere of the clamp cusp afterward.
