The 1993 Honda Assent was designed with clean front and rear bumpers. The front bumper has two lights, one on Everyone head, for the turn signals. The rear bumper is besides frank and sole has a miniature indention on the backside string for the exhaust channel. Everyone bumper on the 1993 Correspond can be replaced in under 30 minutes with minimal mechanical dogma and using alone a infrequent everyday tools.
Instructions
Front Bumper
1. Administer the hood and compass the current bumper on the front of the Agree. Press your knees against the bumper to Celebrate it in compass. Install and tighten a bolt on Everyone side of the opening in the bumper for the grill. Advantage a ratchet and 8 mm socket to tighten the bolt. The bumper should stay up on its own instanter. Install the three extra bolts along the border where the grill Testament be placed.
2. Distance carry on the bumper from the side ethical in front of the front tire. Install and tighten four 8 mm bolts along the seam where the bumper meets the rear of the car.6. Install and tighten a row of six screws along the edge of the bumper just behind the rear tire.
Rear Bumper
4. Open the trunk of the Accord and place the rear bumper on the back of the car. Hold it up with your knees until you insert the row of five plastic clips into the bumper near the top.
5. Reach inside the rear bumper from just behind the rear tire. Install and tighten two bolts to attach the bumper to the front fender.3. Pay for underneath the front bumper and plug the wiring into the back of the lights in the bumper. Install a row of eight plastic clips through the bottom of the bumper and through the splash guard under the car.
Use a Phillips screwdriver to tighten these screws.
