You Testament compass to Blop the Gauze vehicle to convert the fuel pump on a Camaro.
Changing a fuel pump is not normally the most challenging occupation in Car repair. Doing so on a Chevy Camaro is is a at odds conte. It's not the actual changing of the fuel pump that's the test, it's the truth that you gain to Blop the fuel vehicle from the automobile to receive to the fuel pump. Provided you are install the fuel pump, empty the Camaro's fuel tank before you remove it.
Instructions
1. Remove the fuel pump from its seat by pulling down and out. Replace the old fuel pump with the new one. Reinstall the tank and put everything back together in the opposite order of taking it apart.
Govern the door to the Gauze vehicle. Detach the three screws that clasp the filler neck to the intent of the vehivle.
3. Remove the muffler intersect of the exhaust transaction with the socket set. Remove the bolts in front of the muffler. Remove the bolts that hold the muffler and the exhaust pipe to the chassis. Place the muffler and the exhaust pipe aside.
4. Place the floor jack directly in the middle of the fuel tank and raise it so that it is touching the bottom the tank. Remove the two metal straps that hold the tank to the chassis, using the socket set and the wrench set. There should be a large bolt at each end of each strap. Use the ratchet to turn the bolt while you hold the nut to keep it from turning.
5. Lower the tank with the jack and disconnect the fuel line. Remove the tank from under the Camaro.
6. Position the tank so that the port with the sealing ring is facing up. Unhook the electrical leads from the top of the port. Tap the edge of the sealing ring with the screwdriver to receive it to begin turning. Turn the ring until it comes off. Pull the whole apparatus out of the tank.
7. Place the van in gear and engage the emergency brake. Jack up the rear of the motorcar and settle it on jack stands. Disconnect the rejection heavy to the battery.2.
