Blend your gelcoat for a perfectly color-matched repair or still equal an improvement on the recent. Capture colours and tints to base a colourful opaque or obvious peep for your gelcoat. Bring outside your inner artist as you blend well-adjusted a personalized gelcoat colour scheme.
Instructions
Blending Gelcoat
1. Pour a minor immensity of your gelcoat into a paper Mug and add a rare drops of liquid colour pigment (enjoy track of how many drops you applicability so you can reproduce the colour that you comparable elite). Create your beyond compare to practise the combinations of glowing and caliginous tints to boss match your desired peep.
Use your best color match formula to add pigment to an entire paper cup of gelcoat. You will need to multiply the amount of each color drop while keeping the ratio between pigments the same in this larger batch.5. Use a clean popsicle stick to thoroughly stir together all the colors.
Try new color blends and test them using this method until you have developed a pigment recipe that produces your desired color once dried. This process relies on how well you are able to see the differences in color and may take a few attempts to perfect.
4.2. Stir your pigments into the gelcoat with a popsicle stick and apply a gloved finger to handle a mini smear of your compound to the body in an area that has been prepped with sandpaper. Once this dries completely it will show its true final color.3.
Run the stick down the side and scrape the bottom of the cup to color all the gelcoat. Compare your large project-sized batch to the color of your most successful test batch to double check your blend.
6. Read the directions on the gelcoat bottle for a guide to proper activation. Your pigmented gelcoat is now ready to be activated with any MEKP hardening catalyst and applied to a prepared surface according to these specific product instructions.
