ABS Brakes
When you are driving and you shop for the "Analysis Brakes" flash you may influence worried. It may be a barn door dilemma or a clean ABS sensor count. You should help probation ABS sensors yourself before paying a mechanic hundreds to engage in a not difficult van perpetuation activity. Worry your anti-lock brakes in extensive shape is crucial for your safety.
Instructions
1. Construe your van book to jewel the address of your ABS (Anti-lock Braking Transaction) sensor. On most vehicles it is located above the brake pad. The ABS sensor is a minor cylinder with a cord protruding out the top of it. Remove your wheel to receive at it easily.
2.4. Read in your car manual for the ohm reading your ABS sensor should have. Most are 50 ohms.
Pull the cord from the top of the ABS sensor and then unscrew the ABS sensor from the brake housing.3. Wipe the abs sensor off with a rag dampened with brake cleaner fluid. Place the black and red tester leads from the ohm meter on the separate contact points in the ABS sensor plug (where the cord was connected on top of the ABS sensor). It doesn't matter which color lead from the ohm tester you have on each contact point in the ABS sensor plug area. The meter should read near the required ohms (50 ohms) for your vehicle, but if it doesn't you will need to replace the ABS sensor with a new one.
