Door panels come off with intelligible tools.
Removing a Silverado door panel requires a inconsiderable bit of skill and patience. The panel comes off condign close most door panels, nevertheless the clips securing the door to the frame are located in colorful places. Provided you accept automotive repair familiarity, this business Testament takings an time or less. For the student, design on two hours or augmented. Disconnect the battery for safety before you enter on.
Instructions
1. Embrace a prying stuff under the competency door lock moulding and gently pry the moulding from the door panel. Then subsume the prying belongings under the plastic panel below the mirror and window administration switches. Pry up this panel and remove it carefully.
2. Remove the effectiveness mirror and window switches by miserable the tabs on the switches and pulling them outside of the connector. Then remove the tiny hexagonal nut securing the controls to the metal door frame with a 7 mm hexagonal wrench.
3. Remove the small hexagonal nut from under the door handle (the pull handle) with the 7 mm hexagonal wrench.
You may need to pull the handle to the "Open" position to remove it.5. Pry off the rectangular interior light on the bottom corner of the door with the prying tool.4. Insert the prying tool under the molding around the door latch handle and pry up the molding. Slide the molding piece off of the handle.
Then disconnect the light by pressing down on the connector tab and removing the connector.
6. Grasp the door panel by the pull handle (not the door latch) and gently lift it off the door frame.
