Tow the Toyota Prius
The towing eyelet is approximately 6 inches distant with threads on one extremity and a phone on the other. It is earnest that you applicability alone the eyelet that came with the Prius in establishment to avoid poor the machine.2. Remove the eyelet subsume. In an emergency it is doable to employ a cable to tow the Prius for short distances and at low quickness.
Instructions
1. Retrieve the towing eyelet and turn devotee wrench. These are stored with the jack near the spare tire (the particular point varies by base year). The circle kernel wrench is usually used to tighten the turn lug nuts.The preferred money to tow a Toyota Prius is to adoption a turn lift or Apartment lodgings Bedstead tow Motor lorry. Sling type tow trucks should not be used. When using a circle lift Motor lorry, the front wheels should not rotate: they should either be on the lift; or whether the rear wheels are on the lift, then the front wheels should be on a towing dolly.
The eyelet involve is a square encompass with rounded corners countervail to one side of the front bumper. Wrap the Apartment lodgings head screwdriver in the rag to avoid marring the finish, then wedge the wrapped screwdriver into the gap between the cover and the bumper and pry the cover open.
3. Insert the towing eyelet in the hole behind the cover and tighten it by hand.
4. Continue tightening the towing eyelet using the wheel nut wrench. Slide the handle of the wheel nut wrench through the eyelet and twist until the eyelet is secure.
5. Turn the Prius on. Although the Prius is being towed, it must be turned on so you can shift it into neutral. The first driver gets into the Prius, turns it on, shifts to "N" and releases the parking brake. When using the emergency towing procedure, you must have a driver in the Prius to steer and work the brakes.
6. Tow the Prius. The second driver attaches the towing cable to the eyelet and drives the towing vehicle.
