Thermostats are mounted on the ends of skirting board heating units.
Skirting board heater thermostats are borderline voltage thermostats, which turn the leading capacity on and off to the skirting board heater elements. You Testament pride the thermostat mounted directly on the baseboard heater unit. In most cases, the thermostat is reading the air temperature near the floor where the heater is located. Adjusting skirting board heater thermostats for accurate space temperature may prove tricky. Once the devices are allot properly, the baseboard heating units Testament feather efficient, comfortable heat.
1. Turn the skirting board heater on by setting the on-board thermostat to the mid-range site on the dial. In most cases, the thermostat Testament be numbered from 1 finished 10. Place the dial to 5.
2. Allot the indoor extent thermometer in a central stop of the amplitude. The heighth of the thermometer can reach between 36 and 48 inches from the floor.
3. Grant the room to come up to temperature for at least one hour or until the baseboard heater has shut off according to the thermostat setting.
Adjust the thermostat on the baseboard heater until the desired air temperature is met on the thermometer. Record the corresponding thermostat setting to the thermometer reading for future air temperature settings in the room.
4. Read the thermometer of the room air temperature. The thermometer reading will give you a starting point for adjusting the thermostat on the baseboard heater.5.