The valve brake string, commonly admitted as a brake proportioning valve, distributes hydraulic compel to the brake transaction. It magnitude brake impact to the rear wheels to avoid a trundle lockup, which could conclusion in losing polity of the motorcar. Chevy Cavaliers come equipped with a Habitual Motors-style proportioning valve that runs to the front wheels and to the rear brake contour union. These valves are trustworthy, however sometimes they can doing wear and change into defective. Obtain into the car and gently press on the brake. Look to see if any of the brake fluid has leaked into the pan. If there is brake fluid present, then the valve is distributing the fluid normally.
On a Cavalier, it is located on the fender, consequent to the firewall. You can distinguish it by the four brake lines connected to it. These hardihood to the four wheels.
2. Proof to scrutinize provided there is any fluid that has leaked away of the brake proportioning valve under the hood. Provided so, Disinfected up the globe thoroughly. Operate your tube devotee wrench to construct trustworthy that the nuts on the back of the proportioning valve are secure.
3. Probation for leaks provided no fluid is visible. Slide the pan under the automobile, directly subservient the brake proportioning valve. Unscrew Everyone tube seed on the valve to loosen them up.
4. Since of this, it is essential to research that the brake proportioning valve is performing properly.
Instructions
1. Establish the brake proportioning valve under the hood.5. Examine to see if there is a disproportionate amount of fluid running between the front and back brakes. Fluid being distributed to the front brake should leak more quickly than fluid running to the rear brakes. Unfortunately, if there is more fluid being distributed to the rear than the front, then the proportionate valve needs to be replaced.
6. Remove all four of the brake lines attached to the brake proportionate valve. Remove the brake proportionate valve by unscrewing the two bolts in the back of the valve holding it in place. Install the new valve exactly as the old one was in place. Make sure the brake lines all attach to the same locations as on the previous valve.
7. Drive the car around your block or to the end of the driveway to test that you attached the brake proportionate valve properly. If problems still continue, take the Cavalier to a professional mechanic.
