Installing a window on your machine is a course that a DIY mechanic should be able to achieve rather easily. The procedure involves inserting the fresh window glass into the window frame and connecting the glass securely to the window regulator. The installation procedure is good-looking resembling for all vehicles. Provided you palpation you are up to the business, expedient on spending approximately an interval on this project.
Instructions
1. Force to the vehivle door with the window that you intend to repair. Pull the haft and agape the door fully.
2. Bag a Phillips-head screwdriver to remove the screws holding the door panel to the door frame. Some of the screws may be concealed by plastic covers. In this context, apply a brief blade or flat-head screwdriver to pry off the covers and then remove the exposed screws. Lift the panel gone from the door and place it aside for consequent reassembly.
3. Locate the window regulator; it is just below the window frame. Move the regulator to its lowest possible position within the door's access panel.
4. Slide the new window glass into the door frame. Open and close the window to verify that it is installed correctly.
Align the hex-bolt holes on the bottom of the window with those on the window regulator. Tighten the hex bolts between the holes on both components to secure them together.5. Reattach the door panel to the door by placing it on the door frame and refastening the mounting screws.
