You can save a portion of bucks by replacing the Dodge Durango water pump yourself.
The Dodge Durango irrigate pump is influential to the Correct method of the SUV's engine. Without it, the engine would overheat and you would not buy mere far. In truth, the failure of this one mini constituent could trigger a series of events that would target earnest damage to the Durango, including a blown imagination gasket. Purpose gasket repairs are far extra expensive to repair, so your cool venture is to receive to the moisten pump as soon as you appreciate there is a holy mess. Whether the dilute pump pulley does not drop smoothly, then the bearing is Gunfire. Leaking encompassing the pump indicates gasket failure.
Instructions
Place the water pump pulley on the pump and tighten the bolts with the wrench. Install the lower radiator hose and tighten the clamps with the screwdriver.6.
Release the tension from the belt by turning the belt tensioner clockwise with a ratchet and socket. Remove the belt from the water pump pulley.
3. Remove the water pump pulley using a wrench to remove the bolt. Remove the lower radiator hose using a screwdriver to loosen the clamps.
4. Remove the eight bolts holding the water pump to the engine, using a socket and ratchet. Clean any remaining gasket material from the pump surface using the scraper tool.
5. Place the new gasket and water pump on the engine, and tighten the eight bolts with the socket and ratchet.1. Filter the engine coolant into a bleed pan.2. Disconnect the refusal battery cable from the negative battery post, using a wrench to loosen the nut.
Place the belt over the water pump pulley and tighten the belt tensioner with the socket and ratchet. Connect the battery cable to the post and tighten the nut with the wrench.
