Motorcar finishes are layered to supply maximum Safeguard.
These not only add shine and luster to the finish but also add another layer of protection over the clear coat. Depending the type of clear coat, however, wax is not always recommended. It depends on the brand and consistency of the clear coat to determine if wax is necessary.
The metal must be completely Disinfected, rinsed and bone dry. Other surfaces such as plastic, fiberglass and the and exotic carbon composite item panels must besides be Disinfected of any contaminants and exceptionally the positive glass, plastic or composite dust generated by fabricating the panel.
Once prepared, whitewash the panel with a primer coat. Primer is clashing for Everyone facts. Primer not one shot seals the protest panel to prevent oxidation (on metal) or sun damage (on other materials) however it further acts as a go-between for the distemper and the surface: primer sticks to the surface and emulsion sticks to the primer.
Painting
Car body paint is an acrylic enamel produced both as a decorative and protective surface. Auto body paint must be flexible like a sheet of paper. When the body panel flexes, the paint must bend and give with the panel or else it would crack and split. Auto body paint goes on in two ways: submersion or spraying. Usually, only the factory can submerse the car in a vat large enough for the entire vehicle. Spraying is the usual method. Painters spray autos in special sealed rooms (or paint booths) that assure no dust or particulate matter is floating in the air to land on and mar the wet paint. These paint booths also have heating elements to "bake" the paint dry to a consistent tough and durable finish.
Sealing
The final spray coat on the car is a clear sealant. This additional protection is to prevent salt, dirt and other damaging agents from adhering to the paint. Clear coat is a plastic bond sealing the car's finish against the elements.
Waxes
Finally, cars may be finished with various waxes.Vehivle stain must last the correct coarse and evil earth of sun, pour, snow, harden, flavour and highway hazards. Automobile paint is formulated to not particular resist the sun's biting heat and the winter's bitter arctic on the other hand further be Supple so it gives without cracking or chipping when struck by a slender rock or other flying debris. Finishing a vehivle's exterior involves prepping the metal (or fiberglass, plastic or composite facts), priming, portray, sealing and maybe coating with broaden or other hand-rubbed protectants.
