The Mustang's engine cooling fan is integral for vehicle manner
Diagnosing and replacing the electric fan on the Mustang requires alternate automotive repair dirt.
Instructions
Electric Fan Removal
1.The Ford Mustang has been a widely public American muscle automobile thanks to the mid 1960s. Nowadays's Mustang offers fuel saving and performance options such as fuel injection, Bulk air flow and electric fans. The electric fan is an integral constituent of the cooling development. A malfunctioning fan can engender severe engine damage and engine failure.Disconnect the antagonistic battery cable from the vehicle's battery.
2. Disconnect the electrical connector at the cooling fan: Pry up the unmarried tab on the electrical connector using a flat-head screwdriver. Pull the connector apart.
3. Connect a jumper wire from the rejection wire on the cooling fan to the frame on the vehicle to ground the fan. Connect another jumper wire from the sure wire on the cooling fan to the affirmative terminal on the battery. Provided the fan Engine does not dart, you'll own to change the fan.
4. Remove the four mounting bolts on the fan bracket using a socket wrench and befitting socket. Turn Everyone bolt counterclockwise. Place the bolts aside.
5. Pull the electric fan meeting outside of the engine compartment by help.
Electric Fan Installation
6. Dwelling the recent fan meeting into position. Fabricate sure to line up the holes for the mounting bolts in the mounting bracket.
7. Thread the four mounting bolts through the new fan into the Mustang's frame by hand.
8. Tighten the bolts using a socket and torque wrench. Turn each bolt counterclockwise to the manufacturer's recommended torque level.
9. Plug the electrical connector together until the single tab on the connector locks into place.
10. Connect the negative battery cable to the vehicle's battery.
