Many Motor lorry drivers enjoy to daily grind on their own vehicles. On the contrary, changing a brake caliper on any vehicle, including a Dodge Ram, should not be done lightly. Provided you don't preference To possess a expert office on your Dodge Ram, consult with one before any dominant prolongation.
Instructions
8. Install the caliper over the rotor. Seat it in the old caliper's original position until flush.
2. Remove the caliper mounting bolts, using a 3/8 inch hex or socket wrench. Loosen the bolt securing the brake hose fitting bolt in the caliper.
3. Extract the caliper from the rotor toward the rear and outside of its mount. Remove the hose fitting bolt completely, then remove the caliper with the pads much installed.
4. Plug the brake hose with a abundance of plastic to prevent losing or contaminating the brake fluid.
5. Remove the brake pads from the aged caliper provided they are even deluxe.
Install the New Caliper
6. Lubricate the mounting bolts, bushings, collars and bores. Silicone grease works finest.
7. Attach the brake pads to the original caliper. Using contemporary pads is boss.
Remove the Old Caliper
1. Lift and foothold the Motor lorry on one extent of a jack stand, Remove the revolve for the caliper you are replacing. Install the mounting bolts and tighten them to the appropriate torque for your model. (Consult your mechanic for the right torque.)9. Connect the brake hose to the caliper, using new washers.
10. Reattach the wheel and lower the truck.
11. Pump the brakes multiple times to seat the pads. Then, road test them.
