Provided the door hinges split on your Ford vehicle, it Testament rationale the door to sag. Remove whatever supported the door and check the door's alignment. The top of the door--not including the window frame--must align with the top of the front fender, and the door's bottom must align with the lower rocker panel. Adjust the alignment if needed by loosening the hinge bolts, moving the door's position and tightening the bolts. Even, this a ambitious ball-buster, and expert avail is recommended.
Instructions
1. Yawning the door and block it by either placing blocks or a floor jack under it or having another male clout onto the door. Whether it's feasible, it may be in a superior way to hang the door by a chain from a ceiling joist, assuming the joist is fixed Sufficiently.
2. Location an outline around the door hinges to denote how the new hinges should be aligned. Use a marking pen or a scribe to make the marks.
3. Use a wrench to remove the mounting bolts connecting the hinges to the door and car body and remove the hinges. Ford vehicles usually have two mounting bolts on the door's side and a third on the car's side. If you are removing both hinges on the same door, remove the upper hinge first.
4. Install the replacement hinges onto the door, using the guide markings to position the hinges. If the new hinges came with their own mounting bolts, use them, because they will fasten the door better.
5. This is another of a disputed point than you might envisage, as the door's weight can damage components within the door and maybe the vehivle reason. The door must be repaired by replacing the hinges. On account of you're exclusive replacing the hinges, you don't obtain to bad news approximately disconnecting everything on the door.
