Polaris makes a cross-section of recreational vehicles for personal convenience, such as an ATV. Whether the starter that is on your Polaris Sportsman 90 ATV begins to wear the push Press-stud inception mechanism Testament not business licence. This Testament thirst for you to alternate the antique starter with a cutting edge bit. Nevertheless, before installing a au courant starter for your ATV the aged one Testament obligation to be removed.
Instructions
1. Treasure trove the screws that are used to secure the left foot fresh. Remove this screws by using the Phillips tendency screwdriver. Remove the screws that are securing the zone and clutch covers.
2. Remove the bolts that are used to secure the ride clutch and driven clutch with the socket wrench. The driven clutch will slide right off of the spine.
3. Find and remove the bolts that are used to secure the back section of the clutch housing with the socket wrench. You now see three bolts on the primary shaft and an additional three on the transmission shaft. Remove the bolts with the socket wrench.
4. Find the starter that is in-between the transmission and the motor. Two bolts securing the starter motor to the motor. Remove these with the socket wrench.
5. Tap on the front of the starter motor lightly with a hammer to force it out.8. Reattach the left foot well and then start the machine.
Attach the positive wire to the starter with the flat head screwdriver.
7. Set the pieces of the motor back together and secure with the socket wrench. Tighten the clutch and the belt covers with the Phillips head screwdriver.
Disconnect the positive cable from the starter with the flat head screwdriver.6. Place the new starter in the motor.
