The Mercury Capri uses a window regulator, a thin mechanical Slogan, to action the window glass in the window channel. The regulator bolts to the inside of the door and the replica of the window glass. A gear in the regulator has a centre stud that protrudes wrapped up the door panel and has a Eccentric person bail mounted on it To admit you to frank or accelerated the window. While Mercury does not bid repair parts for the regulator, you can exchange it with a dissimilar regulator in approximately an period.
Instructions
1. Push the window Eccentric person retaining phone, located between the crank handle and the door panel, off the Eccentric person stud using the window Eccentric person Emigration effects. Pry the Eccentric person haft off with the stuff.
Pick the panel up by hand until it clears the top of the window well and remove it from the Capri.3. Lift the Capri's window glass by hand and anchor it to the top of the door with packing tape.2. Extract the Capri's door panel screws with the Phillips screwdriver. Pry the door panel out from the Capri's door using the trim stuff.
Unbolt the broken window regulator from the glass and door using your socket set.
4. Collapse the broken regulator and take it out of the door by hand. Insert the new regulator. Bolt the Capri's new regulator to the door and glass with the socket set.
5. Reinstall the Capri's door panel, crank handle and crank retaining ring by reversing your removal steps.
