The epithet "Town Machine" was originally a honour for the highest trim container of the Lincoln Continental, which debuted as a Continental Town Motorcar in 1959. Lincoln moved the title to its own design path in 1981, when the head Lincoln Town Motorcar arrived in showrooms. The doors of the 2003 Lincoln Town Machine territory a cross-section of accessories, including the door module, function lock actuator, bent window Engine, window regulator and window and lock switches. The switches reside in the door panel itself, while the other components are installed inside the door.
Instructions
1. Lower the Town Vehivle's window. Pry the trim caps off the ends of the door pull strap. Pry the trim incorporate absent of the inner door arm bezel.
2. Remove the two screws holding the door pull strap to the door, using a socket wrench and an 8-mm socket. Remove the screw inside the inner door shaft bezel, using the socket and wrench.
3. Lift the door panel up and off the door. Stretch between the door panel and door to disconnect the influence window and lock switches from the wiring harness.
4. Disconnect the inner door handle cable from the door shaft. Unplug the courtesy glossy wiring harness. Stir the panel elsewhere from the door to outright Emigration.
Connect the inner door helve cable to the inner door handle.6. Lower the Town Car's door panel onto the door, guiding the upper portion of the panel into the window well and the retainer tabs located on the backside of the panel into their respective slots on the inner door skin.7.5. Procedure the door panel consequent to the door. Plug the wiring harnesses into the courtesy flare and window and lock switches.
Reinstall the three screws -- two in the door pull and one in the inner door handle bezel -- using the socket wrench and socket. Reinstall the inner door handle trim bezel and door pull trim caps to complete reinstallation.
