Many of the components in 1995 Chevrolet trucks are protected by the door panel. To access the hasp, window Engine, door speakers or endowment lock Engine, you own to early remove the inventory inside door panel and accommodation it to the side. Although this isn't express effortful to act, using specialized tools Testament support you effect it efficiently and without causing extremely still damage to the panel. This should part approximately 15 minutes to engage in.
Instructions
1. Bare the door as far as viable. City the blade of the flathead screwdriver between the bezel sorrounding the interior door panel and the door panel and benefit the stuff to pry off the bezel. Pull off the limited, triangular interior panel located adverse the side mirror using your hands.
2. Lift off the power window switch panel using your hands. Turn it over and unplug the wiring harness connected to the backside of the switch panel. Repeat this for each clip on the panel, moving your way first along the bottom of the door, then up the sides.5. Lift the door panel up and off of the door. Remove it from the car completely.
4. Place the blade of the interior trim removal tool between the door panel and the door and probe around until the notched piece extreme of the tool goes around a clip. You'll know when this happens when the tool stops moving forward. Pull the handle towards you to release the clip from the door panel. Remove the panel from the car.3. Unscrew the two phillips-head screws located on the inside of the armrest, right where you hold the door when you pull it shut, using the Phillips-head screwdriver.
