Spoilers and other custom target parts can be homemade.
These parts can be moulded in your own garage, giving you the pride of forging the effects yourself and saving you chicamin in the manner.
Instructions
1. Frame an outline of the factor to be created on a block of styrofoam.Customized machine parts can be expensive and bothersome to boast. Trying to jewel that complete spoiler or other vehivle reason Element can model you to costly Car item shops that ofttimes assent you thinking you'll corner to deposit for a principles product at a premium valuation. Happily, you can construct your own custom Car entity parts by moulding them gone of fiberglass and foam.This outline Testament fact as a american man to chop absent the Ending shape of your desired comp.
2. Using your assistance lancet, section outside the foam to cast a styrofoam base of your thing. Don't control about making all of the edges smooth. Just make a rough cut of the desired shape.
3. Sand the styrofoam with 180-grit sandpaper to smooth the part into the final desired shape. Take time with this step. The foam will sand quickly so if you aren't paying attention the overall shape may be altered from what you had in mind. Step back from the piece frequently during this process to view it from a distance and make sure you are shaping it correctly.
4. Cover the shaped styrofoam in adhesive resin applied with a paint brush, and cover the shape with fiberglass cloth. Press the fiberglass cloth into the styrofoam with a hard roller. Allow the piece to dry for 12 hours. Repeat the process until four layers of fiberglass cloth have been applied to the foam sculpture. Allow the part to dry for a full Day and night after the final layer of fiberglass has been applied.
5. Paint the fiberglass part with a colored finishing resin. The finishing resin can be purchased from your local auto body shops. The store can match the resin to the rest of the paint on your car by using the paint code from the car. Apply the finishing resin in thick coats with a paint brush.
6. Allow the finishing resin to dry until it is tacky to the touch, and then apply the next layer. Repeat this process until a minimum of four layers of finishing resin have been applied. Allow the part to cure for three to four days after the final coat has been applied.
7. Examine the auto body piece for rough or uneven spots after the resin has cured completely. Sand the rough spots with 180-grit sandpaper to smooth out the surface of the piece. The colored resin will ensure that the sanding doesn't result in blemishes.
8. Buff the entire part with an auto body buffer to polish it to a high gloss.
