It's easier to distemper a bumper when it is removed from the motorcar and placed on a stand.
Plastic bumpers are the parts that embrace the actual metal bumper attached to the frame of a vehicle. The plastic bumper's shape goes with the flow and intent lines of your van and most generally matches the machine's item in its dye scheme. In that the bumper is plastic rather than event metal enjoy remainder of the motorcar, handle changed steps to prepare a plastic bumper for dye. Preparing the bumper for representation makes the illustration mode quicker and also efficient.
Instructions
1. Remove the bumper from the van whether credible. Practice a ratchet and socket to remove all bolts and nuts from the bumper and benefit a Phillips screwdriver to remove screws from the sides of the bumper. Deposit the bumper on a stand or benefit a thin wire to hang the bumper by the bolt-holes on Everyone side. Establish the rafter used to hang the bumper is sturdy and won't fall during the preparation.
2. Sand the bumper using 120-grit sandpaper. Dominion the sandpaper Apartment lodgings against the surface and sand evenly until the bumper is stupid and no longer shiny.
3. Handle plastic surface cleaner to scrub the plastic bumper. Use a microfiber towel to reduce the amount of lint that gets onto the surface. Rinse the area and allow it to dry completely.
4. Sand the plastic bumper with 400-grit sandpaper and water, keeping the sandpaper soaking wet while sanding. Sand evenly so that the bumper is very smooth and dull. Rinse the bumper and allow it to dry completely. Wipe the plastic bumper once more with a tack rag to pick up any remaining dust or dirt particles.
Wipe prep solvent over the plastic bumper using a clean microfiber cloth. Wipe the solvent in one direction so dirt particles aren't wiped back onto the clean surface. The solvent does not need to be rinsed or cleaned off.5. It is now ready for paint.
