The interior of your machine is supposed to be comfortable and decorous for you to propel approximately in. As beautiful as the interior is, the complete gander is ruined when the roof interior info is flapping, peeling or falling down. This isn't one shot unsightly, nevertheless it can be a safety hazard by blocking your outlook elsewhere of the rear window.
Instructions
Replace the trim pieces around the edges of the new headliner and screw them into place. This helps hold the headliner on, so make sure to tuck any extra fabric behind the trim before tightening the screws. Pull it off by handwriting until it is completely removed.
2. Call a screwdriver to unscrew and remove the screws holding in the plastic trim that frames the headliner. There should be at least three or aggrandized screws down Everyone side of the trim.
3. Degree the immensity of the roof where the headliner goes. Degree the breadth and length. Dwelling the new material on a flat surface and measure it to fit the ceiling. Use scissors to chop the headliner to fit, leaving an extra inch or two around the entire piece.
4. Turn the new headliner fabric face down on a flat surface. Spray a light-to-medium coat of spray adhesive on one end, about a foot across. Allow the glue to dry until it feels tacky to the touch.
5. Place the fabric in the car and press the sprayed section into place on the ceiling. Place the piece flat against the roof and press, removing any wrinkles with your hand. Once this section is stuck to the ceiling, lightly spray the next foot-long section. Allow it to become tacky and then press it to the ceiling, smoothing the wrinkles. Repeat this process until all of the fabric is stuck to the ceiling.
6.1. Contemplate the roof interior cloth, called the headliner, to gaze what process it's in. Provided there are single a unusual limited areas that are loose, you might be able to reuse the info. Whether a considerable parcel of the headliner is sagging, the filled factor needs to be pulled off.
