Vance and Hines sideshot dependable dual exhaust.
Vance and Hines makes some of the finest aftermarket parts for Harley Davidsons and other custom motorcycles. Established in 1979, Vance and Hines manufactures exhaust and air intake systems for dirt, method, and track motorcycles that pitch enhanced performance overstock products. Prerrogative dual exhaust systems, systems which encompass one exhaust pipe exiting one cylinder, are one of Vance and Hines specialties and are a regular upgrade for many Harley Davidson motorcycle enthusiasts. While many shops Testament install the exhaust tools for you, it is completely no problem for a motorcycle fanatic to perform this upgrade by himself.
Provided imperative, drill holes in the frame or other parts of the intent kit to which to mount the brackets.3. Install the exhaust by attaching all of the brackets along the length of exhaust pipe and then installing and tightening the header bolts. Make sure you replace all of the gaskets before tightening the header bolts; otherwise an exhaust leak could be caused.
Disconnect any O2 sensors that may be attached to the exhaust itself.
2. Disconnect the mounting hardware along the length of the exhaust using a screwdriver and ratchet. Change the gray hardware with the fresh mounting hardware if in the Vance and Hines implements.
Instructions
1. Loosen the header bolts attaching your ongoing exhaust process to your cylinders. Cook confident the engine has cooled at least 30 minutes from your ultimate operate before attempting to remove the exhaust method.Reconnect the oxygen sensors.
4. Repeat steps 1 to 3 for each cylinder of your motorcycle engine.
