Chilled air intakes Testament deed your Accord engine an added boost.
The Honda Comply comes with either a 2.2 or 2.7 litre engine that can deliver the automobile as all the more as 170 horsepower. To ante up the 1997 Coincide engine exceeding capability and a cramped another sparkle, you can install a algid air intake process. The Conform's inventory air box brings air into the engine by fascinating the surrounding air in the engine compartment and pushing it into the engine intake. Alternatively, the bleak air intake brings in air from away the engine compartment.
Instructions
1. Disconnect the negative battery cable using the wrench. Locate the Accord stock intake on the right side of the engine compartment. The large rubber hose traveling to the engine is the intake hose. Undo the intake hose clip and disconnect it from the engine.
2. Remove the four bolts surrounding the stock air box using the ratchet, and pull the entire air box from the engine bay. Place the saddle bracket onto the middle stock bolt hole and tighten it using a nut.
3. Use the screwdriver to install the rubber mount that the intake rests on onto the remaining stock bolt holes. Place the intake hose onto the saddle bracket and secure it with one of the hose clamps.
4. Insert the conical air filter into the hose adapter and insert them into the lower end of the intake hose. Secure it with a hose clamp and the screwdriver. Insert the cold air hose down through the engine bay in between the lower spoiler and undercarriage trim. Secure it with a zip tie.
The engine will sound significantly throatier.5. Place the upper end of the cold air hose about four inches from the cold air filter, and fasten it to the vacuum hose with a zip tie. Reconnect the battery to the vehicle and turn the Accord on to test the intake.
