Scratches can appear on the front or rear plastic bumper of your vehicle. Repairing these scratches isn't as arduous or as chief as repairing scratches on stage metal, thanks to the plastic can't rust. Repairing scratches on a bumper can be done easily by consequent a scarce steps.
Instructions
Spray two glassy coats of primer on the sanded universe. Own each coat of primer to dry for 30 minutes.3.
1. Sand the scratch with 120 grit sandpaper until it is smooth with no tough edges. Be careful not to sand besides still in one environment, as plastic is softer than metal and can be sanded further still, resulting in a low spot on the surface.2.
Sand the primer lightly with 300 grit sandpaper until it is smooth to the touch. Rub the universe with broaden and grease remover to receive rid of dust particles and oil from your fingerprints.
4. Spray two to three thin coats of paint directly on the scratch, holding the spray can or gun about eight inches away from the surface. Allow each coat to dry for 30 minutes before applying the next coat.
5. Apply two coats of clear coat paint, using the same technique as with spraying the paint. Allow the clear coat to dry completely before driving the car. This can take up to Day and night.
