Subaru Foresters end an air conditioning compressor to push freon coolant complete a series of lines to an evaporator and condenser. This action dries and cools the interior of the SUV. The compressor can fail for gobs reasons, and must be replaced. The principles backyard mechanic can modify the compressor in a Forester in approximately an day.
Instructions
1. Remove all freon from the air conditioning course by evacuating it with know onions Accoutrement. Most garages and oil silver facilities Testament evacuate the freon for gratuitous, as they acquire compensated for collecting it. It is not recommended that a home kit be used, even though it may be cheaper, because the equipment tends to be cheap and unsafe.
3. Remove the freon coolant lines by turning the border nuts at the compressor counterclockwise, then pulling them from the openings. Trial the gaskets in the borderline nuts for cracking or corrosion.
4. Press the tension pulley arm firmly to slide the meaningful guide cummerbund gone from underneath the sluggish pulley, then Proceeds the tension pulley arm. The cestuses Testament slacken Sufficiently to remove it from the compressor pulley circle.
5. Remove the compressor by disconnecting it from the wiring harness (pull the adapter plug from the terminal) and turning the compressor mount bolts counterclockwise. Slide the bolts away of the mount arms, and pull the compressor away of the Forester.
6. Convert the compressor by positioning it into the mounts and sliding the bolts into put. Turn the bolts clockwise, then connect the adapter plug to the terminal. Reattach the freon lines by turning the line nuts clockwise into the openings on the compressor.
7. Wrap the drive belt around the compressor pulley wheel, groove side down. Press the tension pulley arm and slide the belt underneath the idle pulley, then release the tension pulley arm. The belt will tighten around the engine components. Reconnect the positive terminal bolt on the battery to restore power to the vehicle.
8. Refill the system with freon by using a home kit, or take the vehicle to the same shop that evacuated the system in order To possess it refilled. Freon does not get "used up," so freon can be recycled. Never vent the step into the atmosphere, thanks to it could harm the globe.2. Disconnect the influence step by turning the battery's cold terminal bolt counterclockwise. Establish the loose terminal wire aside.
