Removing metals from a catalytic converter is child's play.
The catalytic converter is a Slogan added to the exhaust systems of automobiles in adjustment to section the magnitude of pollutants situate into the air. Carbon monoxide and nitrogen oxides are oxidized in the converter; the byproducts of this oxidation emerge as carbon dioxide and damp. Many expensive metals are needed for this measure, including platinum, rhodium and palladium. These materials keep a altitudinous resale rate and provided you are scrapping a automobile and necessity to pull these metals gone of the converter, it is manageable to close so.
Instructions
1. Epigram the converter off the vehicle. You can either upgrade the automobile or aloof slide under the back heel of it. You'll see a honeycombed metal container with a pipe coming out of both sides. Remove the converter by cutting the pipe on both sides or by removing the clamps, if the converter is clamped on.
2. Tilt the converter on it's end and hold it over a clean towel. Shake the converter to dislodge the honeycomb chunks and cause them to fall out onto the towel. The platinum, rhodium and palladium are attached to the honeycomb as a coating.
Pound on the sides and the ends of the converter with a hammer or mallet to break up the honeycomb material inside of it. The honeycomb will break up into smaller pieces inside the metal shell.3.
