Remove a dent from your garage door with a lighter, aluminum foil and compressed air.
Remove the aluminum foil. Hold the compressed air canister upside down and spray the dent on your garage with liquid carbon dioxide for 30 seconds.5. Watch as the dent on your garage disappears. Replacing an entire panel is usually not necessary. Instead, try a dent removal technique used on automobiles and steel doors to eliminate dents.
Instructions
1. Fill a bucket with water and add 1 tsp. dish soap. Swirl the water and dish soap with a sponge to mix. Wash the dented area of the garage with the sponge to remove any dirt. Hose off thoroughly with water and allow it to dry completely for one hour.
2. Unroll a piece of aluminum foil from the roll that is long enough to completely cover the dent in your garage, making sure you will have enough excess foil to have room to hold the foil against the garage. Use the metal teeth on the aluminum foil box to cut off the piece of aluminum foil.
3. Stand next to the dent in your garage door. Set the aluminum foil, the lighter, and the compressed air canister, with the top removed, at your feet. Pick up the piece of aluminum foil, and lay it flat against your garage door so it completely covers the entire dent. Hold it against your garage door with your hand at the edge of the foil.
4. Light the lighter, and move the flame back and forth across the entire dent for one minute.Whether you keep an aluminium or steel garage door, you've probably already discovered that although it is quite maintenance-free, it dents easily. You don't admit to hit it with your vehivle, although that happens much Sufficiently. A stray baseball, children using the garage door as a tennis Companion or a soccer intent can go-ahead a dent in your garage that may freedom you tempted to expenditure elsewhere a inexperienced panel for your garage door.
The temperature difference between the liquid carbon dioxide and the heated dent will force the dent to pop out within two minutes. Hose off the dented area of your garage door to remove any leftover carbon dioxide.