Wednesday 22 April 2015

Mix Clearcoat Vehicle Fresh paint

Crystal coat Testament protect you brand-new dye task


The Ending method in protecting your van's colouring duty is applying a clear coat. The clear coat protects your paint job and provides the desired level of gloss to your car. Your clear coat is made up of two different parts, the clear paint and the hardener. If left out for several hours, the mixture will harden.5. Place your filter cone on top of the paint gun's opening. Pour the mixture into your paint gun and you are ready to begin to clear coat your car.




1. Decide between an overall clear coat or a spot clear coat. Overall clear coats are used for painting an entire car. Spot clear coats are used for touch-up work.


2. Pour a ratio of 4 to 1. You will be using 4 oz. of clear coat for every 1 oz. of acrylic hardener. Once you pour in the acrylic hardener, the chemical reaction will begin to activate the paint. Plan on making 20 percent more clear coat car paint than you will need.


3. Pour in the same amount of acrylic reducer as you did acrylic hardener. The acrylic reducer will keep your paint thin enough to go through your paint gun.


4. Stir the mixture. You need to use this mixture within a few hours. Mixing your clear coat needs to be done in the correct proportions; incorrect proportions will cause your clear coat to thicken before you are done using it.

Instructions

Mix Clearcoat Car Paint